# Latest **URL:** https://community.beestat.io/latest.md [Latest](https://community.beestat.io/latest.md) · [Categories](https://community.beestat.io/categories.md) · [Tags](https://community.beestat.io/tags.md) --- ## [Introducing my new app - Songstead!](https://community.beestat.io/t/introducing-my-new-app-songstead/2123)
**Author:** [@ziebelje](https://community.beestat.io/u/ziebelje)\ **Replies:** 0\ **Last updated:** [July 25, 2026, 10:35am UTC](https://community.beestat.io/t/introducing-my-new-app-songstead/2123 "2026-07-25T10:35:42Z")
Hi all! I have a brand new app that I want to share. It’s called Songstead, and it’s built for anyone who plays music at any level. It has tools to help you manage your charts, setlists, and also the ability to share all… --- ## [Run Time Alert](https://community.beestat.io/t/run-time-alert/2134)
**Author:** [@JamesO](https://community.beestat.io/u/JamesO)\ **Replies:** 0\ **Last updated:** [September 20, 2026, 10:56am UTC](https://community.beestat.io/t/run-time-alert/2134 "2026-09-20T10:56:48Z")
While the Ecobee thermostat will alert or give you an alarm if the system runs for an extended length of time if the desired temperate is not met, from my experience this tends to be a very broad window and alerts way to… --- ## [Different Slopes for Roofs](https://community.beestat.io/t/different-slopes-for-roofs/2133)
**Author:** [@Lucastw17](https://community.beestat.io/u/Lucastw17)\ **Replies:** 2\ **Last updated:** [September 1, 2026, 5:11pm UTC](https://community.beestat.io/t/different-slopes-for-roofs/2133 "2026-09-01T17:11:41Z")
The upstairs bedrooms in my house have a shed-ceiling roof where the ceiling slopes downwards in the room instead of the ceiling being flat. So my upstairs roof and the room below have one slope from the top to bottom. I… --- ## [Inverted heat profile](https://community.beestat.io/t/inverted-heat-profile/2125)
**Author:** [@Paul.M](https://community.beestat.io/u/Paul.M)\ **Replies:** 4\ **Last updated:** [August 26, 2026, 5:04pm UTC](https://community.beestat.io/t/inverted-heat-profile/2125 "2026-08-26T17:04:34Z")
Anyone have insight into why my heat temperature profile would be technically inverted. The slope is technically -0.0177, so basically flat. I would expect to see it at least be trending the other way around. --- ## [Cycle Counter - Include with total run time](https://community.beestat.io/t/cycle-counter-include-with-total-run-time/2132)
**Author:** [@ShakMN](https://community.beestat.io/u/ShakMN)\ **Replies:** 0\ **Last updated:** [August 18, 2026, 11:30pm UTC](https://community.beestat.io/t/cycle-counter-include-with-total-run-time/2132 "2026-08-18T23:30:49Z")
The beestat DETAIL tab has a section “Thermostat Detail”. Can the cycle count be included with the summary of total run time, ie “Cool 5h 30m Fan 5h 45m”? We all know that short cycling is hard on a compressor. This fe… --- ## [Outdoor temperature source](https://community.beestat.io/t/outdoor-temperature-source/1432)
**Author:** [@hpl](https://community.beestat.io/u/hpl)\ **Replies:** 12\ **Last updated:** [August 5, 2026, 9:18pm UTC](https://community.beestat.io/t/outdoor-temperature-source/1432 "2026-08-05T21:18:06Z")
More an ecobee than beestat question, but how happy are people with the source that ecobee uses, which I guess must be The Weather Channel? This morning they (and my ecobee) said my local temp was -10C. The Weather Netw… --- ## [Second stage cooling activating seldomly](https://community.beestat.io/t/second-stage-cooling-activating-seldomly/2126)
**Author:** [@SThomas8389](https://community.beestat.io/u/SThomas8389)\ **Replies:** 1\ **Last updated:** [August 4, 2026, 10:37am UTC](https://community.beestat.io/t/second-stage-cooling-activating-seldomly/2126 "2026-08-04T10:37:55Z")
I’ve been having an issue lately where in manual mode the delay I set is not consistently followed. Any reason why that would be and is it possible for me to use beastat to find out why? --- ## [Show the comfort profile instead of "hold" when thermostat is holding comfort profile](https://community.beestat.io/t/show-the-comfort-profile-instead-of-hold-when-thermostat-is-holding-comfort-profile/2122)
**Author:** [@Lucastw17](https://community.beestat.io/u/Lucastw17)\ **Replies:** 2\ **Last updated:** [July 24, 2026, 9:57pm UTC](https://community.beestat.io/t/show-the-comfort-profile-instead-of-hold-when-thermostat-is-holding-comfort-profile/2122 "2026-07-24T21:57:19Z")
Hello, I think it would be very helpful to show the comfort profile that is being held instead of showing “hold” for the comfort profile when one is being held. I often hold a specific comfort profile if I do not follow… --- ## [Show total runtime in Runtime Summary tooltip](https://community.beestat.io/t/show-total-runtime-in-runtime-summary-tooltip/233)
**Author:** [@Nexxus](https://community.beestat.io/u/Nexxus)\ **Replies:** 3\ **Last updated:** [July 20, 2026, 3:41pm UTC](https://community.beestat.io/t/show-total-runtime-in-runtime-summary-tooltip/233 "2026-07-20T15:41:07Z")
In the Thermostat Summary graph, those of us with 2stage units see separate runtimes for each stage, which is great. But can you add a ‘total runtime’ field right under them so I don’t have to add them together in my he… --- ## [Question about analyzing](https://community.beestat.io/t/question-about-analyzing/2121)
**Author:** [@Doug1](https://community.beestat.io/u/Doug1)\ **Replies:** 0\ **Last updated:** [July 15, 2026, 3:00am UTC](https://community.beestat.io/t/question-about-analyzing/2121 "2026-07-15T03:00:35Z")
Hello, first post here. I was wondering if it would be possible for me to post some of the data from my system from a few days and have someone analyze it and tell me what they think about how my system is set, a couple… --- ## [Allow Temperature Profiles per Floor](https://community.beestat.io/t/allow-temperature-profiles-per-floor/2117)
**Author:** [@rcmaehl](https://community.beestat.io/u/rcmaehl)\ **Replies:** 4\ **Last updated:** [July 7, 2026, 12:01pm UTC](https://community.beestat.io/t/allow-temperature-profiles-per-floor/2117 "2026-07-07T12:01:51Z")
I have 1 sensor in the basement, 2 on the first floor, and 2 on the second floor. Currently, I’m assuming that Temperature Profiles just use Indoor Temp (which can be WILDLY inaccurate, I’ll make a thread for that next).… --- ## [Beestat API Questions/Clarifications](https://community.beestat.io/t/beestat-api-questions-clarifications/1759)
**Author:** [@rakeshg](https://community.beestat.io/u/rakeshg)\ **Replies:** 6\ **Last updated:** [July 6, 2026, 10:27pm UTC](https://community.beestat.io/t/beestat-api-questions-clarifications/1759 "2026-07-06T22:27:52Z")
Hello: I have just started using Beestat API and have been able to get thermostat and sensor data (detail and summary using thermostat.read\_id, sensor.read\_id, runtime\_thermostat.read, runtime\_sensor.read, runtime\_therm… --- ## [July 1st 2026: API LOG Error Message](https://community.beestat.io/t/july-1st-2026-api-log-error-message/2114)
**Author:** [@Steveman](https://community.beestat.io/u/Steveman)\ **Replies:** 8\ **Last updated:** [July 4, 2026, 10:17pm UTC](https://community.beestat.io/t/july-1st-2026-api-log-error-message/2114 "2026-07-04T22:17:06Z")
Not sure if others are having this issue. Started today. Can log into the Ecobee App but not beestat. Keep getting this message. Thoughts ? --- ## [Help me help it make sense (threshold settings)](https://community.beestat.io/t/help-me-help-it-make-sense-threshold-settings/1550)
**Author:** [@youdontknowkev](https://community.beestat.io/u/youdontknowkev)\ **Replies:** 2\ **Last updated:** [July 4, 2026, 4:57pm UTC](https://community.beestat.io/t/help-me-help-it-make-sense-threshold-settings/1550 "2026-07-04T16:57:29Z")
Am i the only one being driven crazy by manual threshold settings that do absolutely nothing? i’ve searched all over and either find people acting like it works as expected or also finding the settings are wonky, but no … --- ## [No data in Analyze since June 26, right when I need it most!](https://community.beestat.io/t/no-data-in-analyze-since-june-26-right-when-i-need-it-most/2116)
**Author:** [@gdd9000](https://community.beestat.io/u/gdd9000)\ **Replies:** 2\ **Last updated:** [July 3, 2026, 1:05pm UTC](https://community.beestat.io/t/no-data-in-analyze-since-june-26-right-when-i-need-it-most/2116 "2026-07-03T13:05:54Z")
Hello, For whatever reason, the last data I can see on the analyze tab (on desktop using firefox browser on mac) is from June 26. On iOS beestat, the data shows up through July 2, today. Thanks, Geoff --- ## [Visualizer - Import a floor plan](https://community.beestat.io/t/visualizer-import-a-floor-plan/2111)
**Author:** [@shaun3000](https://community.beestat.io/u/shaun3000)\ **Replies:** 0\ **Last updated:** [June 26, 2026, 8:21pm UTC](https://community.beestat.io/t/visualizer-import-a-floor-plan/2111 "2026-06-26T20:21:21Z")
Sent this via email a while back, never got around to posting it, here. Better late than never! The visualizer is super tedious to build. It would be super helpful if it allowed a floorpan to be imported. At the very le… --- ## [Beestat Temperature Profiles only displaying Heat 1 not Heat 2](https://community.beestat.io/t/beestat-temperature-profiles-only-displaying-heat-1-not-heat-2/2107)
**Author:** [@miles267](https://community.beestat.io/u/miles267)\ **Replies:** 4\ **Last updated:** [June 17, 2026, 10:36am UTC](https://community.beestat.io/t/beestat-temperature-profiles-only-displaying-heat-1-not-heat-2/2107 "2026-06-17T10:36:46Z")
Hi - I’ve been using my Ecobee units for over a year with a dual fuel system. Heat 1 - high efficiency inverter heat pump and Heat 2 - auxiliary natural gas heat. In Beestat under Analyze, both Heat 1 and Heat 2 displa… --- ## [Testing Beestat API: Where do I get thermostat\_id](https://community.beestat.io/t/testing-beestat-api-where-do-i-get-thermostat-id/1756)
**Author:** [@rakeshg](https://community.beestat.io/u/rakeshg)\ **Replies:** 5\ **Last updated:** [May 25, 2026, 2:58pm UTC](https://community.beestat.io/t/testing-beestat-api-where-do-i-get-thermostat-id/1756 "2026-05-25T14:58:24Z")
Hello - just discovered Beestat and I’m trying to use the API to get data on my thermostats. I have the API key and I can call ecobee\_thermostat.read\_id and get results. However, when I try and add the thermostat\_id to g… --- ## [What I've found most useful](https://community.beestat.io/t/what-ive-found-most-useful/1758)
**Author:** [@hinckley](https://community.beestat.io/u/hinckley)\ **Replies:** 0\ **Last updated:** [May 23, 2026, 4:32pm UTC](https://community.beestat.io/t/what-ive-found-most-useful/1758 "2026-05-23T16:32:06Z")
I’ve been using this for 3 months now and have found the most useful feature is the ability to track temperatures from all my remote sensors (as well as the main sensor). I used it to track how all the different rooms in… --- ## [Beestat API](https://community.beestat.io/t/beestat-api/1371)
**Author:** [@fordguy64](https://community.beestat.io/u/fordguy64)\ **Replies:** 18\ **Last updated:** [April 28, 2026, 10:40am UTC](https://community.beestat.io/t/beestat-api/1371 "2026-04-28T10:40:56Z")
Im new to API’s. I was looking at the Beestat API’s and i didnt see one for the IAQ feature on the ecobee thermostat. Is that an option? id like to control my fresh air damper off of that. Rob --- ## [Any FAQ's for beestat?](https://community.beestat.io/t/any-faqs-for-beestat/1727)
**Author:** [@markieB](https://community.beestat.io/u/markieB)\ **Replies:** 5\ **Last updated:** [April 7, 2026, 10:32pm UTC](https://community.beestat.io/t/any-faqs-for-beestat/1727 "2026-04-07T22:32:31Z")
Is there any getting started guide around? Just found this site when working on my new ecobee Thermostat! --- ## [HVAC Sizing with Beestat](https://community.beestat.io/t/hvac-sizing-with-beestat/1007)
**Author:** [@tdykhuis](https://community.beestat.io/u/tdykhuis)\ **Replies:** 12\ **Last updated:** [March 31, 2026, 4:18pm UTC](https://community.beestat.io/t/hvac-sizing-with-beestat/1007 "2026-03-31T16:18:12Z")
Sizing Replacement HVAC Equipment Using Runtime Data I’d like to offer a couple of methods for those who are interested in sizing a replacement furnace / heat pump using beestat / ecobee data. See the GBA article by Dana… --- ## [Ingest Third-Party Temperature/Humidity Sensor Data](https://community.beestat.io/t/ingest-third-party-temperature-humidity-sensor-data/1179)
**Author:** [@zp08](https://community.beestat.io/u/zp08)\ **Replies:** 5\ **Last updated:** [March 27, 2026, 5:17pm UTC](https://community.beestat.io/t/ingest-third-party-temperature-humidity-sensor-data/1179 "2026-03-27T17:17:48Z")
Feature Request: Ingest Temperature/Humidity Data from third-parties, e.g. Aqara. Beestat does a beautiful job with showing the individual sensor data based on Ecobee’s Thermostats and Smart Sensors. There are rooms whe… --- ## [API call for runtime\_thermostat.read with multiple thermostats](https://community.beestat.io/t/api-call-for-runtime-thermostat-read-with-multiple-thermostats/1714)
**Author:** [@swensonator](https://community.beestat.io/u/swensonator)\ **Replies:** 5\ **Last updated:** [March 26, 2026, 6:21pm UTC](https://community.beestat.io/t/api-call-for-runtime-thermostat-read-with-multiple-thermostats/1714 "2026-03-26T18:21:43Z")
First of all, thank you. I love Beestat and use it daily. I just recently started playing with the API and writing some custom dashboards to consolidate my three Ecobee thermostats. I have one Ecobee Premium and two Ec… --- ## [Ecobee + Heatpump have a hard time recovering in mild weather](https://community.beestat.io/t/ecobee-heatpump-have-a-hard-time-recovering-in-mild-weather/1712)
**Author:** [@ColonelChupacabra](https://community.beestat.io/u/ColonelChupacabra)\ **Replies:** 12\ **Last updated:** [March 24, 2026, 3:30pm UTC](https://community.beestat.io/t/ecobee-heatpump-have-a-hard-time-recovering-in-mild-weather/1712 "2026-03-24T15:30:33Z")
When the weather is mild (-5C to 5-10C), my heat pump has a really hard time recovering from the lower temperatures set during the night and even has a hard time keeping up during the day. I’m not sure how much contro… --- ## [API call limit reached](https://community.beestat.io/t/api-call-limit-reached/1706)
**Author:** [@Cloud](https://community.beestat.io/u/Cloud)\ **Replies:** 2\ **Last updated:** [March 22, 2026, 3:32am UTC](https://community.beestat.io/t/api-call-limit-reached/1706 "2026-03-22T03:32:35Z")
See attached. Is this a problem on my end or with beestat? This happened when I was trying to refresh the temp resistance heat cool trend line graph. --- ## [Timing mismatch between ecobee and energy usage data](https://community.beestat.io/t/timing-mismatch-between-ecobee-and-energy-usage-data/1720)
**Author:** [@Doug](https://community.beestat.io/u/Doug)\ **Replies:** 0\ **Last updated:** [March 21, 2026, 4:22pm UTC](https://community.beestat.io/t/timing-mismatch-between-ecobee-and-energy-usage-data/1720 "2026-03-21T16:22:17Z")
I’ve got an emporia vue3 energy monitor with sensors on my 2 stage heatpump and have built a spreadsheet showing the energy usage timestamped along with the ecobee data showing when the heatpump is on and in what stage. … --- ## [3D Visualizer - Environment Mode](https://community.beestat.io/t/3d-visualizer-environment-mode/1709)
**Author:** [@ziebelje](https://community.beestat.io/u/ziebelje)\ **Replies:** 0\ **Last updated:** [March 15, 2026, 1:31pm UTC](https://community.beestat.io/t/3d-visualizer-environment-mode/1709 "2026-03-15T13:31:24Z")
Launch day is Monday 3/16! Check out this video to get acquainted. --- ## [Reset Beestat Stats](https://community.beestat.io/t/reset-beestat-stats/1708)
**Author:** [@TheAngryBunny](https://community.beestat.io/u/TheAngryBunny)\ **Replies:** 1\ **Last updated:** [March 13, 2026, 10:21am UTC](https://community.beestat.io/t/reset-beestat-stats/1708 "2026-03-13T10:21:27Z")
I just had a new Heat Pump put in and would like to start fresh with Beestat. Is there any way to reset my account and start fresh? --- ## [Tri-plex monitoring](https://community.beestat.io/t/tri-plex-monitoring/1702)
**Author:** [@Jbayker](https://community.beestat.io/u/Jbayker)\ **Replies:** 2\ **Last updated:** [March 6, 2026, 6:24pm UTC](https://community.beestat.io/t/tri-plex-monitoring/1702 "2026-03-06T18:24:38Z")
I currently own a tri-plex property and all 3 units are on the same gas meter. Because of this I cannot accurately calculate each units gas usage/heat consumption which means I cannot charge them for their specific gas u… [Next page](https://community.beestat.io/latest.md?page=1)