# Heat vs Resist doesn't seem right

**URL:** https://community.beestat.io/t/heat-vs-resist-doesnt-seem-right/1350
**Category:** Bug Reports
**Created:** [January 6, 2025, 6:02pm UTC](https://community.beestat.io/t/heat-vs-resist-doesnt-seem-right/1350 "2025-01-06T18:02:54Z")
**Posts on this page:** 4
**Page:** 1

<div class="post-metadata">

### Author: ![tkzzz](https://community.beestat.io/letter_avatar_proxy/v4/letter/t/94ad74/32.png) [@tkzzz](https://community.beestat.io/u/tkzzz)
#### Post date: [January 6, 2025, 6:02pm UTC](https://community.beestat.io/t/heat-vs-resist-doesnt-seem-right/1350/1 "2025-01-06T18:02:54Z")

</div>

Not sure if this is a bug or if I’m not interpreting the data correctly.  
My Heat1 says 0.0C/hr and Heat2 says +0.1C/hr while Resist says -0.6C/hr. Based on this my house is losing heat faster than the hvac system can heat it up, but that’s not actually true. The house is maintaining the set point and I can see the temp increasing in the charts. I have a heat pump system. Beestat screenshots below:

 ![beestat-profile](https://community.beestat.io/uploads/default/original/1X/bbd03dca77bc359f305e82f2a865794905e029ca.png)

 ![beestat-detail](https://community.beestat.io/uploads/default/original/1X/b6bd44beee83b2cec0d02a5e33862ec3fdcfa0c2.png)

---

<div class="post-metadata">

### Author: ![Jtbgonesailing](https://community.beestat.io/letter_avatar_proxy/v4/letter/j/5fc32e/32.png) [@Jtbgonesailing](https://community.beestat.io/u/Jtbgonesailing)
#### Post date: [January 8, 2025, 7:14pm UTC](https://community.beestat.io/t/heat-vs-resist-doesnt-seem-right/1350/2 "2025-01-08T19:14:29Z")

</div>

Your heat1 & heat2 temperature slopes are a net heat after the application of the rest gain or loss to the value is applied. The temperature slopes are not gross, but net.

---

<div class="post-metadata">

### Author: ![tkzzz](https://community.beestat.io/letter_avatar_proxy/v4/letter/t/94ad74/32.png) [@tkzzz](https://community.beestat.io/u/tkzzz)
#### Post date: [January 8, 2025, 9:08pm UTC](https://community.beestat.io/t/heat-vs-resist-doesnt-seem-right/1350/3 "2025-01-08T21:08:39Z")

</div>

Got it, that makes sense now. Thanks!

I think the confusion is from the labels which make me think of heat output of the hvac system as opposed to the resultant indoor temperature change.

Perhaps a mini table like this in the tooltip would help:

| | Heat 1 | Heat 2 | Aux |
| --- | --- | --- | --- |
| Heat Gain | 0.6°C / h | 0.7°C / h | - |
| Heat Loss | -0.6°C / h | -0.6°C / h | -0.6°C / h |
| Net Change | 0.0°C / h | 0.1°C / h | - |

(Aux values aren’t showing in the app yet for me, I guess due to very limited aux runtime.)

---

<div class="post-metadata">

### Author: ![system](https://community.beestat.io/uploads/default/original/1X/1aae50114ef63970cb76f963398ca488a1165eda.png) [@system](https://community.beestat.io/u/system)
#### Post date: [January 15, 2025, 9:09pm UTC](https://community.beestat.io/t/heat-vs-resist-doesnt-seem-right/1350/4 "2025-01-15T21:09:25Z")

</div>

This topic was automatically closed 7 days after the last reply. New replies are no longer allowed.