# Heating profile info missing
**URL:** https://community.beestat.io/t/heating-profile-info-missing/1281
**Category:** Feedback & Discussion
**Created:** [October 28, 2024, 6:24pm UTC](https://community.beestat.io/t/heating-profile-info-missing/1281 "2024-10-28T18:24:56Z")
**Posts on this page:** 2
**Page:** 1
### Author:  [@Goose01](https://community.beestat.io/u/Goose01)
#### Post date: [October 28, 2024, 6:24pm UTC](https://community.beestat.io/t/heating-profile-info-missing/1281/1 "2024-10-28T18:24:56Z")
The temperature profile slope for heating is missing from my thermostat data. This only happens if I enter a custom date. We made adjustments to our HVAC and I wanted to see if it made any noticeable difference, hence the custom date range.
Is 8 wks of data enough to populate the profile slope?
---
### Author:  [@ziebelje](https://community.beestat.io/u/ziebelje)
#### Post date: [November 2, 2024, 9:37am UTC](https://community.beestat.io/t/heating-profile-info-missing/1281/2 "2024-11-02T09:37:40Z")
Whether or not there is enough data depends mostly on how much your heat ran in those 8 weeks. For most ecobee users, the past two months haven’t been especially cold so there’s likely not enough heating data. It usually takes at least a couple weeks of cold weather to get a profile, and a couple months for everything to average out nicely.