# Show the comfort profile instead of "hold" when thermostat is holding comfort profile

**URL:** https://community.beestat.io/t/show-the-comfort-profile-instead-of-hold-when-thermostat-is-holding-comfort-profile/2122
**Category:** Feature Requests
**Created:** [July 22, 2026, 12:24pm UTC](https://community.beestat.io/t/show-the-comfort-profile-instead-of-hold-when-thermostat-is-holding-comfort-profile/2122 "2026-07-22T12:24:26Z")
**Posts on this page:** 3
**Page:** 1

<div class="post-metadata">

### Author: ![Lucastw17](https://community.beestat.io/letter_avatar_proxy/v4/letter/l/65b543/32.png) [@Lucastw17](https://community.beestat.io/u/Lucastw17)
#### Post date: [July 22, 2026, 12:24pm UTC](https://community.beestat.io/t/show-the-comfort-profile-instead-of-hold-when-thermostat-is-holding-comfort-profile/2122/1 "2026-07-22T12:24:26Z")

</div>

Hello,

I think it would be very helpful to show the comfort profile that is being held instead of showing “hold” for the comfort profile when one is being held. I often hold a specific comfort profile if I do not follow my schedule. I would like to monitor thermostat performance based on comfort profile but it is kind of confusing when it just says “hold”. If possible, I think it would be beneficial to still show that it is held, but also show what comfort profile is being held (home, away, etc). See the image for reference.

 ![11746](https://community.beestat.io/uploads/default/original/1X/28775f1fd98306ed00528b82a0cb0b53c449175b.jpeg)

Thank you,

Lucas

---

<div class="post-metadata">

### Author: ![ziebelje](https://community.beestat.io/user_avatar/community.beestat.io/ziebelje/32/633_2.png) [@ziebelje](https://community.beestat.io/u/ziebelje)
#### Post date: [July 24, 2026, 9:43pm UTC](https://community.beestat.io/t/show-the-comfort-profile-instead-of-hold-when-thermostat-is-holding-comfort-profile/2122/2 "2026-07-24T21:43:39Z")

</div>

I would have to double check, but I’m pretty sure I don’t get that information. If you switch to a manual hold the thermostat just reports “hold” very generically.

---

<div class="post-metadata">

### Author: ![Lucastw17](https://community.beestat.io/letter_avatar_proxy/v4/letter/l/65b543/32.png) [@Lucastw17](https://community.beestat.io/u/Lucastw17)
#### Post date: [July 24, 2026, 9:57pm UTC](https://community.beestat.io/t/show-the-comfort-profile-instead-of-hold-when-thermostat-is-holding-comfort-profile/2122/3 "2026-07-24T21:57:19Z")

</div>

Yeah I was wondering if that would be the case but thank you for double checking. I appreciate all the features you have included in the app!