# \#:detail **URL:** https://community.beestat.io/tag/detail/9.md [Latest](https://community.beestat.io/latest.md) · [Categories](https://community.beestat.io/categories.md) · [Tags](https://community.beestat.io/tags.md) --- ## [Ingest Third-Party Temperature/Humidity Sensor Data](https://community.beestat.io/t/ingest-third-party-temperature-humidity-sensor-data/1179)
**Author:** [@zp08](https://community.beestat.io/u/zp08)\ **Replies:** 5\ **Last updated:** [March 27, 2026, 5:17pm UTC](https://community.beestat.io/t/ingest-third-party-temperature-humidity-sensor-data/1179 "2026-03-27T17:17:48Z")
Feature Request: Ingest Temperature/Humidity Data from third-parties, e.g. Aqara. Beestat does a beautiful job with showing the individual sensor data based on Ecobee’s Thermostats and Smart Sensors. There are rooms whe… --- ## [Add Degrees per hour to sensor detail](https://community.beestat.io/t/add-degrees-per-hour-to-sensor-detail/1674)
**Author:** [@Patrick\_NY](https://community.beestat.io/u/Patrick_NY)\ **Replies:** 0\ **Last updated:** [February 11, 2026, 11:35am UTC](https://community.beestat.io/t/add-degrees-per-hour-to-sensor-detail/1674 "2026-02-11T11:35:19Z")
any chance you can add degrees per hour in the Sensor Detail card - in the tooltip? .. both as the system is heating AND as the house is losing temp … ?? --- ## [Add indoor/outdoor dewpoint to Thermostat Detail?](https://community.beestat.io/t/add-indoor-outdoor-dewpoint-to-thermostat-detail/1138)
**Author:** [@aaiyar](https://community.beestat.io/u/aaiyar)\ **Replies:** 1\ **Last updated:** [June 9, 2025, 5:26am UTC](https://community.beestat.io/t/add-indoor-outdoor-dewpoint-to-thermostat-detail/1138 "2025-06-09T05:26:37Z")
Hi Jon - Was an early user of beestat, and then switched to using a z-wave thermostat with multiple zigbee temperature sensors that were all controlled with a Node-RED flow. I moved houses recently and am back to using … --- ## [Ingest weather data from Wunderground?](https://community.beestat.io/t/ingest-weather-data-from-wunderground/1189)
**Author:** [@aaiyar](https://community.beestat.io/u/aaiyar)\ **Replies:** 8\ **Last updated:** [July 3, 2025, 10:26am UTC](https://community.beestat.io/t/ingest-weather-data-from-wunderground/1189 "2025-07-03T10:26:11Z")
The weather station chosen by ecobee for my location doesn’t reflect the temperature and humidity recorded by my Tempest and ecowitt weather stations, which are pretty close to each other. While both are quite distinct (… --- ## [Display of Auto-Pause Data](https://community.beestat.io/t/display-of-auto-pause-data/1466)
**Author:** [@Klilovar1959](https://community.beestat.io/u/Klilovar1959)\ **Replies:** 3\ **Last updated:** [May 25, 2025, 2:36am UTC](https://community.beestat.io/t/display-of-auto-pause-data/1466 "2025-05-25T02:36:07Z")
I am using ecobee security with door/window sensors. This includes a feature to auto-pause heating and cooling if a door or window is left open. When this feature is engaged it shows as “other” on the beestat trend. Some… --- ## [Add custom note or comment to a data point or range of data points](https://community.beestat.io/t/add-custom-note-or-comment-to-a-data-point-or-range-of-data-points/1188)
**Author:** [@wack70](https://community.beestat.io/u/wack70)\ **Replies:** 0\ **Last updated:** [June 13, 2024, 8:01pm UTC](https://community.beestat.io/t/add-custom-note-or-comment-to-a-data-point-or-range-of-data-points/1188 "2024-06-13T20:01:05Z")
I’d like to be able to select a data point or a range of data points in the thermostat and sensor detail cards and add a custom note or comment for the data that would display in the tool tip. A use case example would be… --- ## [Include System Status in Sensor Detail](https://community.beestat.io/t/include-system-status-in-sensor-detail/1194)
**Author:** [@zp08](https://community.beestat.io/u/zp08)\ **Replies:** 0\ **Last updated:** [June 20, 2024, 12:58pm UTC](https://community.beestat.io/t/include-system-status-in-sensor-detail/1194 "2024-06-20T12:58:00Z")
It would be nice to have the option to include the same details that are in the Thermostat Detail in the Sensor Detail; e.g. System Mode, Heat/Cool/Fan Runtimes, Setpoint. The hover details already include the Comfort P… --- ## [Add heat setpoint to sensor detail](https://community.beestat.io/t/add-heat-setpoint-to-sensor-detail/1299)
**Author:** [@aaronwb599](https://community.beestat.io/u/aaronwb599)\ **Replies:** 0\ **Last updated:** [December 1, 2024, 4:32am UTC](https://community.beestat.io/t/add-heat-setpoint-to-sensor-detail/1299 "2024-12-01T04:32:05Z")
I’d love the ability add (and toggle on/off) the heat set points on the “sensor detail” graph. Right now it’s only available on the thermostat detail pane. Mega bonus points if I could somehow combine both graphs with t… --- ## [Sending data to beestat](https://community.beestat.io/t/sending-data-to-beestat/1336)
**Author:** [@Bobby](https://community.beestat.io/u/Bobby)\ **Replies:** 0\ **Last updated:** [December 26, 2024, 9:24pm UTC](https://community.beestat.io/t/sending-data-to-beestat/1336 "2024-12-26T21:24:31Z")
Right now, the beestat only shows the thermostat side, calling for heat. Having a single stage boiler, I would like to keep track when the boiler turns on and off. I have ESP Home sending this information to node-RED bu… --- ## [Display both humidifier and ventilator run](https://community.beestat.io/t/display-both-humidifier-and-ventilator-run/1385)
**Author:** [@f00kie](https://community.beestat.io/u/f00kie)\ **Replies:** 0\ **Last updated:** [January 21, 2025, 2:17pm UTC](https://community.beestat.io/t/display-both-humidifier-and-ventilator-run/1385 "2025-01-21T14:17:19Z")
I recently hooked up 2 accessories to my Ecobee Premium (which is now possible). As such, I have both a humidifier and a ventilator that I control. However, the display only has 1 “row” for it, and basically combines the… --- ## [Collecting Data from Flair Vents into Beestst](https://community.beestat.io/t/collecting-data-from-flair-vents-into-beestst/1348)
**Author:** [@Klilovar1959](https://community.beestat.io/u/Klilovar1959)\ **Replies:** 2\ **Last updated:** [January 5, 2025, 2:50pm UTC](https://community.beestat.io/t/collecting-data-from-flair-vents-into-beestst/1348 "2025-01-05T14:50:04Z")
In 2022 there was an earlier request to collect data from Flair vents. At that time it appears that Flair did not collect historical data. They do now, and it’s available in the Flair app under stats. I collected a few p… --- ## [Flair/ecobee integration](https://community.beestat.io/t/flair-ecobee-integration/717)
**Author:** [@4pawsguy](https://community.beestat.io/u/4pawsguy)\ **Replies:** 2\ **Last updated:** [January 4, 2025, 5:59pm UTC](https://community.beestat.io/t/flair-ecobee-integration/717 "2025-01-04T17:59:42Z")
The sensor reporting is fabulous in beestat. I would like to be able to show the flair automated vent status alongside the ecobee sensor status. Is there anyway to have beestat pull in the flair vent status and keep/mai… --- ## [Can't tell between Stage 1 and Stage 2?](https://community.beestat.io/t/cant-tell-between-stage-1-and-stage-2/1251)
**Author:** [@ishtarbgl](https://community.beestat.io/u/ishtarbgl)\ **Replies:** 2\ **Last updated:** [September 5, 2024, 1:25pm UTC](https://community.beestat.io/t/cant-tell-between-stage-1-and-stage-2/1251 "2024-09-05T13:25:59Z")
I really like Beestat and thanks for providing it. I’m new to it, but noticing one thing that I’m surprised hasn’t already been brought up. That is, it is difficult to tell at a glance when Stage 2 has been engaged fro… --- ## [Show current cooling/heating temperature differential (gives insight into automatic staging)](https://community.beestat.io/t/show-current-cooling-heating-temperature-differential-gives-insight-into-automatic-staging/714)
**Author:** [@digitalcircuit](https://community.beestat.io/u/digitalcircuit)\ **Replies:** 22\ **Last updated:** [August 20, 2024, 1:15pm UTC](https://community.beestat.io/t/show-current-cooling-heating-temperature-differential-gives-insight-into-automatic-staging/714 "2024-08-20T13:15:10Z")
First up - thank you for beestat! This is the majority of the reason I picked ecobee :slight\_smile: EDIT 2022-8-26: After further testing, I suspect the API responds with the last saved manual staging differential, ev… --- ## [Show system off time on thermostat detail](https://community.beestat.io/t/show-system-off-time-on-thermostat-detail/803)
**Author:** [@ziebelje](https://community.beestat.io/u/ziebelje)\ **Replies:** 5\ **Last updated:** [July 11, 2024, 10:49am UTC](https://community.beestat.io/t/show-system-off-time-on-thermostat-detail/803 "2024-07-11T10:49:45Z")
Much like runtime on the thermostat detail chart, also show “off time” when hovering over the empty blocks. --- ## [Provide Options to Account for DM Offset for Eco+](https://community.beestat.io/t/provide-options-to-account-for-dm-offset-for-eco/1186)
**Author:** [@zp08](https://community.beestat.io/u/zp08)\ **Replies:** 1\ **Last updated:** [June 19, 2024, 7:33pm UTC](https://community.beestat.io/t/provide-options-to-account-for-dm-offset-for-eco/1186 "2024-06-19T19:33:26Z")
It would be nice if there were some options we could toggle to account for the DM Offset values… e.g. options toggle to either factor it in to the graphs or not, or to see what the DM Offset Value is with the Thermostat … --- ## [Show Change in Temperature during Equipment Runtime in Tooltip](https://community.beestat.io/t/show-change-in-temperature-during-equipment-runtime-in-tooltip/1180)
**Author:** [@zp08](https://community.beestat.io/u/zp08)\ **Replies:** 2\ **Last updated:** [May 30, 2024, 10:49am UTC](https://community.beestat.io/t/show-change-in-temperature-during-equipment-runtime-in-tooltip/1180 "2024-05-30T10:49:59Z")
In the Runtime Details that show how long the Heat/Cooling/Fan ran for, it shows the temperature of each Thermostat/Sensor for that specific point in time that you’re hovering over. It would be great if it also showed wh… --- ## [Combine data from multiple thermostats onto a single chart](https://community.beestat.io/t/combine-data-from-multiple-thermostats-onto-a-single-chart/187)
**Author:** [@ekimsnibor](https://community.beestat.io/u/ekimsnibor)\ **Replies:** 9\ **Last updated:** [January 23, 2024, 2:24am UTC](https://community.beestat.io/t/combine-data-from-multiple-thermostats-onto-a-single-chart/187 "2024-01-23T02:24:38Z")
I have two thermostats (dual zone, single furnace). I would like to see a graph that shows the combined (single furnace) usage. It would combine both both zones (thermostats) in one graph. That way I could see if I was e… --- ## [Show timestamp for when data was last updated](https://community.beestat.io/t/show-timestamp-for-when-data-was-last-updated/312)
**Author:** [@ziebelje](https://community.beestat.io/u/ziebelje)\ **Replies:** 2\ **Last updated:** [December 15, 2023, 12:23am UTC](https://community.beestat.io/t/show-timestamp-for-when-data-was-last-updated/312 "2023-12-15T00:23:15Z")
Migrated from: Idea. Time stamp visible for last update, or time of data from ecobee. Perhaps along with a count-down icon/bar/digits of when to expect new data or update. --- ## [Add calculated values for indoor/outdoor dewpoints](https://community.beestat.io/t/add-calculated-values-for-indoor-outdoor-dewpoints/879)
**Author:** [@dewberry](https://community.beestat.io/u/dewberry)\ **Replies:** 0\ **Last updated:** [April 14, 2023, 8:58pm UTC](https://community.beestat.io/t/add-calculated-values-for-indoor-outdoor-dewpoints/879 "2023-04-14T20:58:35Z")
Hi, it would be nice to see calculated dewpoints for indoor and outdoor humidity as RH is a kind of silly metric though certainly better than nothing --- ## [Show Smart Recovery status on system card](https://community.beestat.io/t/show-smart-recovery-status-on-system-card/1010)
**Author:** [@ziebelje](https://community.beestat.io/u/ziebelje)\ **Replies:** 0\ **Last updated:** [December 5, 2023, 1:31am UTC](https://community.beestat.io/t/show-smart-recovery-status-on-system-card/1010 "2023-12-05T01:31:40Z")
On the bottom right of the System card, instead of the current comfort profile, or in addition to, show “Smart Recovery” when the system is in Smart Recovery --- ## [Suggestion for Sensor Detail](https://community.beestat.io/t/suggestion-for-sensor-detail/962)
**Author:** [@dkgibson](https://community.beestat.io/u/dkgibson)\ **Replies:** 2\ **Last updated:** [October 19, 2023, 5:39pm UTC](https://community.beestat.io/t/suggestion-for-sensor-detail/962 "2023-10-19T17:39:15Z")
When you have a lot of sensors (I have 8), it is hard to see a particular sensor graph with so many similar colors. Right now, you can click on the legend to disable a graph, but it would be nice to include clicking on … --- ## [Could you add a dew point graph and maybe interpolate forward?](https://community.beestat.io/t/could-you-add-a-dew-point-graph-and-maybe-interpolate-forward/952)
**Author:** [@NW64](https://community.beestat.io/u/NW64)\ **Replies:** 2\ **Last updated:** [October 11, 2023, 10:33am UTC](https://community.beestat.io/t/could-you-add-a-dew-point-graph-and-maybe-interpolate-forward/952 "2023-10-11T10:33:08Z")
I use a very simple threshold to open the windows and turn off the A/C. If the dew point is below 58F, then the mold risk is minimized. It would be great to see that in beestat rather than have to pull up another app and… --- ## [Include sunsrise to sunset data](https://community.beestat.io/t/include-sunsrise-to-sunset-data/481)
**Author:** [@Montumba](https://community.beestat.io/u/Montumba)\ **Replies:** 3\ **Last updated:** [July 22, 2023, 6:02pm UTC](https://community.beestat.io/t/include-sunsrise-to-sunset-data/481 "2023-07-22T18:02:58Z")
My temperatures seem to be heavily affected by where the sun is on the sky. It would nice to see that information in several spots where you currently display outdoor statistics such as temperature. I am thinking a sim… --- ## [Highlight weekends (or other intervals) on charts](https://community.beestat.io/t/highlight-weekends-or-other-intervals-on-charts/19)
**Author:** [@tibble](https://community.beestat.io/u/tibble)\ **Replies:** 12\ **Last updated:** [December 23, 2022, 1:56pm UTC](https://community.beestat.io/t/highlight-weekends-or-other-intervals-on-charts/19 "2022-12-23T13:56:59Z")
I posted this to github before but am recreating it here for possible discussion. In the Thermostat Summary chart I would like to see weekend dates highlighted similar to how they are in the Ecobee Weather Impact graph. … --- ## [Scroll back in time on charts using lazy-load data pull](https://community.beestat.io/t/scroll-back-in-time-on-charts-using-lazy-load-data-pull/774)
**Author:** [@dancoxatlive.com](https://community.beestat.io/u/dancoxatlive.com)\ **Replies:** 0\ **Last updated:** [November 17, 2022, 5:00am UTC](https://community.beestat.io/t/scroll-back-in-time-on-charts-using-lazy-load-data-pull/774 "2022-11-17T05:00:39Z")
It would be really cool if the date range on the Sensor Detail chart (and on the other charts too) would have access to the full 3 months of data but still only show 7 days at a time. What I mean is, it would be really … --- ## [Increase refresh rate / Live Dashboard](https://community.beestat.io/t/increase-refresh-rate-live-dashboard/311)
**Author:** [@ziebelje](https://community.beestat.io/u/ziebelje)\ **Replies:** 0\ **Last updated:** [January 22, 2021, 12:29am UTC](https://community.beestat.io/t/increase-refresh-rate-live-dashboard/311 "2021-01-22T00:29:17Z")
Migrated from: A few things would be useful if configurable for folks that use Beestat as a ‘portal’ display showing semi-realtime info. Thermostat status (immediate state of temp, etc specific to your Ecobee) would … --- ## [Recent Activity - Humidity](https://community.beestat.io/t/recent-activity-humidity/331)
**Author:** [@ziebelje](https://community.beestat.io/u/ziebelje)\ **Replies:** 0\ **Last updated:** [January 22, 2021, 1:07am UTC](https://community.beestat.io/t/recent-activity-humidity/331 "2021-01-22T01:07:26Z")
Migrated from: Need a different version of the Recent Activity graph that focuses on humidity. There is outdoor humidity, indoor humidity, desired humidity, humidifiers, and dehumidifiers. My current vision for this … --- ## [Identify if sensor is participating in comfort setting on detail graph](https://community.beestat.io/t/identify-if-sensor-is-participating-in-comfort-setting-on-detail-graph/728)
**Author:** [@alantoo](https://community.beestat.io/u/alantoo)\ **Replies:** 3\ **Last updated:** [September 18, 2022, 12:35am UTC](https://community.beestat.io/t/identify-if-sensor-is-participating-in-comfort-setting-on-detail-graph/728 "2022-09-18T00:35:52Z")
During some settings I have sensor participation disabled to skew the average towards outliers. For example when sun is hitting front vs back of home, I want it to cool better to account for those higher temps. While I c… --- ## [Chart absolute humidity in air](https://community.beestat.io/t/chart-absolute-humidity-in-air/321)
**Author:** [@ziebelje](https://community.beestat.io/u/ziebelje)\ **Replies:** 3\ **Last updated:** [August 31, 2022, 10:06pm UTC](https://community.beestat.io/t/chart-absolute-humidity-in-air/321 "2022-08-31T22:06:18Z")
Migrated from: The relative humidity thrashes around as the temperature fluctuates. Could you have an option to display absolute humidity (water weight in air)? (EDIT: Dew Point would be a good measure of this, thanks… [Next page](https://community.beestat.io/tag/detail/9.md?match_all_tags=true&page=1&tags%5B%5D=%3Adetail)